Spring Hanger SHD  Formatwork
 Applicable
 Deck plate/Slab with an insulation mat placed
 Use  For light gage steel frames and heavy equipment
 Type  Spring type

 
“Á’·

�œDeveloped for the slab with an insulation mat placed.
�œSuitable for the insulation with thickness of 25 mm and 50 mm.
�œA spring is used to fix the insert.The insert will not be tipped even
�@if stomped.
�œEasy installation only by pressing the insert by hand into the drilled
�@hole etc.
�œColor can be checked from top and bottom of the deck plate.
�œInsured with product liability insurance
 
�¦Use[Spring Hanger SHZ] for the slab with fire resistant coating.
�¦Embedded depth in concrete can be changed with L-type used.
 
 Part No.List-Code No.M10077 Spring Hanger SHD �¦Pullout test values are values when the insert breaks Unit:mm
Part No. Thread
size
Effective
Embedded
Depth(mm)
 Insulation
Thickness
(mm)
Drill
Diameter
(mm)
Embedded in Concrete,Pullout
Test Result
Quantity/
Case(pcs)
Color Effetive Thread Length S Diameter of Head
‚c
Diameter of Core
‚„
Height
‚g
Thickness of Head
‚ˆ
Insulation Layer
‚`
Ave.
Pullout Force(kN)
Concrete Compressive Strength(N/mm2)
SHD-3025 W3/8 32.5 25 16.0 14.6 17.6 200
RD BL YL WT GR
13 22 12 35 2.5 25
SHD-3025L W3/8 42.5 25 16.0 20.9 23.6 200
�y RD BL YL WT GR �z
13 22 12 45 2.5 25
SHD-3050 W3/8 47.5 50 16.0 26.0 26.2 150
�y RD BL YL WT GR �z
13 22 12 50 2.5 50
SHD-4025 W1/2 46 25 22.0 33.1 18.6 100
�y RD BL YL WT GR �z
25 28 17 50 4 25
SHD-4025L W1/2 56 25 22.0 38.6 28.0 100
�y RD BL YL WT GR �z
25 28 17 60 4 25
SHD-4050 W1/2 46 50 22.0 33.1 18.6 100
�y RD BL YL WT GR �z
25 28 17 50 4 50
SHD-5025L W5/8 100 25 28.0 60.9 16.3 50
�y RD BL YL WT GR �z
30 38 22 105 5 25
SHD-5050 W5/8 75 50 28.0 61.1 24.1 50
�y RD BL YL WT GR �z
30 38 22 80 5 50
SHD-M1025 M10 52.5 25 17.0 26.8 23.6 200
�y RD BL YL WT GR �z
13 22 13 55 2.5 25
SHD-M1225 M12 46 25 22.0 33.1 18.6 100
�y RD BL YL WT GR �z
25 28 17 50 4 25
  Items in square brackets are the set available upon order.
 Placement Procedure
1.Open a hole into an insulation using a Slidart punch.
2.Cut a hole at the marked position on the deck plate
  precisely using a drill or hole saw of the specified
  diameter (see for boring tools.)
3.Easy installation by pressing the insert lightly into the hole
  by hand.
4.Screw in a bolt to the full depth to prevent loosening.