| Color |
|
Click the appointed color. |
|
|
| Features |
|
●Easily Installed on the insulation with a plastic fitting only.
Can also be anchored on to the formwork using nails.(Nails are sold separately.)
●Use plastic nails when anchored on to the formwork.
Length of the nails suitable for thickness of the insulation
S-50 for insulation of 25 mm thick
S-70 for insulation of 50 mm thick
●After the formwork is removed,the color is visible from the bottom of
the slab.
●Using longer insert,embedment depth can be increased.Contact us.
●A Slidart Punch for boring insulation comes with the inserts when purchased
by a case |
|
| |
| Part No.List-Code No. M10059 Slidart GSD |
|
※Pullout test values are values when the insert breaks Unit:mm |
| Part No. |
Thread
size |
Effective
Embedded
Depth(mm) |
Insulation
Thickness
(mm) |
Embedded in Concrete,Pullout Test Result |
Quantity/
Case(pcs) |
Color |
Effetive Thread Length S |
Diameter of Head
Ｄ |
Diameter of Core
ｄ |
Height
Ｈ |
Thickness of Head
ｈ |
Insulation Layer
Ａ |
Ave.
Pullout Force(kN) |
Concrete Compressive Strength(N/mm2) |
| GSD-3025 |
W3/8 |
32.5 |
25 |
14.6 |
17.6 |
250 |
RD・BL・YL・WT・GR・【OR・PK】 |
13 |
22 |
12 |
35 |
2.5 |
25 |
| GSD-3050 |
W3/8 |
32.5 |
50 |
14.6 |
17.6 |
200 |
RD・BL・YL・WT・GR・【OR・PK】 |
13 |
22 |
12 |
35 |
2.5 |
50 |
| GSD-3025L・50L |
W3/8 |
42.5 |
25 |
20.8 |
23.6 |
250 |
【RD・BL・YL・WT・GR・OR・PK】 |
13 |
22 |
12 |
45 |
2.5 |
25 |
| GSD-3050L・50L |
W3/8 |
42.5 |
50 |
20.8 |
23.6 |
200 |
【RD・BL・YL・WT・GR・OR・PK】 |
13 |
22 |
12 |
45 |
2.5 |
50 |
| GSD-4025 |
W1/2 |
51 |
25 |
31.6 |
16.3 |
100 |
RD・BL・YL・WT・GR・【OR・PK】 |
25 |
28 |
17 |
55 |
4 |
25 |
| GSD-4050 |
W1/2 |
51 |
50 |
31.6 |
16.3 |
100 |
RD・BL・YL・WT・GR・【OR・PK】 |
25 |
28 |
17 |
55 |
4 |
50 |
| GSD-4025L・80L |
W1/2 |
66 |
25 |
42.1 |
17.6 |
100 |
RD・BL・YL・WT・GR・【OR・PK】 |
25 |
28 |
17 |
70 |
4 |
25 |
| GSD-4050L・80L |
W1/2 |
66 |
50 |
42.1 |
17.6 |
100 |
RD・BL・YL・WT・GR・【OR・PK】 |
25 |
28 |
17 |
70 |
4 |
50 |
| GSD-M1025 |
M10 |
32.5 |
25 |
14.6 |
17.6 |
250 |
【RD・BL・YL・WT・GR】 |
13 |
22 |
13 |
35 |
2.5 |
25 |
| GSD-M1050 |
M10 |
32.5 |
50 |
14.6 |
17.6 |
200 |
【RD・BL・YL・WT・GR】 |
13 |
22 |
13 |
35 |
2.5 |
50 |
| GSD-M1025L・60L |
M10 |
52.5 |
25 |
26.9 |
23.6 |
250 |
【RD・BL・YL・WT・GR】 |
13 |
22 |
13 |
55 |
2.5 |
25 |
| GSD-M1050L・60L |
M10 |
52.5 |
50 |
26.9 |
23.6 |
200 |
【RD・BL・YL・WT・GR】 |
13 |
22 |
13 |
55 |
2.5 |
50 |
| GSD-M1225L･80L |
M12 |
66 |
25 |
42.1 |
17.6 |
100 |
【RD・BL・YL・WT・GR・OR・PK】 |
25 |
28 |
17 |
70 |
4 |
25 |
| GSD-M1250L･80L |
M12 |
66 |
50 |
42.1 |
17.6 |
100 |
【RD・BL・YL・WT・GR・OR・PK】 |
25 |
28 |
17 |
70 |
4 |
50 |
|
Items in square brackets are the set available upon order. |
|
|
|
| |
| Placement Procedure |
|
|
１．Open a hole into an insulation using a Slidart punch (twist-in vertically).
２．Insert the plastic fitting into the hole of insulation,and drive plastic
nails as required.
３．After placement of reinforcing bars,place the insert onto the plastic
fixture.
４．Screw in a bolt to the full depth to prevent loosening |
|
|
|
