| Color Hole |
Formwork
Applicable |
Plywood |
| Use |
For heavy equipment |
| Type |
No after-treatment of nailes required. |
|
|
| |
 |
| Features |
|
●Troublesome after-treatment of nails is no longer required.
It is completely removed from the slab.
●Because a section of the insert exposed underneath the slab is
limited, a neat finish is realized. (Ideal for fair-faced concrete ceiling)
●A single nail allows precise driving of the insert at the marked position
●Allows installation after placement of reinforcement
●Fixtures can be reused and installed on the formwork when the marked
position is the same.
→【Suitable for armor construction and flying floor construction methods】
●Suitable for hanging heavy items like sanitary and air conditioning systems
●Insured with product liability insurance |
| |
|
| |
 |
|
| |
|
| Part No. List - Code No.M10051 Color Hole |
※Pullout test values are when the insert breaks |
Unit:mm |
|
| Part No. |
Thread size |
Effective
Embedded
Depth(mm) |
Embedded in Concrete, Pullout Test Result |
Quantity/
Case
(pcs) |
Color |
Effective
Thread
Length S |
Diameter
of Head
D |
Diameter
of Core
d |
Height
H |
Thickness
of Head
h |
Ave.
Pullout Force(kN) |
Concrete
Compressive
Strength(N/mm2) |
| CH-3040 |
W3/8 |
40.5 |
22.3 |
19.0 |
500 |
|
13 |
22 |
12 |
40 |
2.5 |
| CH-3050 |
W3/8 |
50.5 |
25.7 |
23.5 |
400 |
|
13 |
22 |
12 |
50 |
2.5 |
| CH-4060 |
W1/2 |
61 |
38.6 |
28.0 |
250 |
|
25 |
28 |
17 |
60 |
4 |
| CH-5070 |
W5/8 |
70 |
45.2 |
22.3 |
100 |
|
30 |
37 |
22 |
70 |
5 |
| CH-M840 |
M8 |
40.5 |
22.3 |
19.0 |
500 |
|
10 |
22 |
12 |
40 |
2.5 |
| CH-M1040 |
M10 |
45 |
20.8 |
23.6 |
500 |
|
13 |
22 |
13 |
45 |
2.5 |
| CH-M1050 |
M10 |
55 |
26.8 |
23.6 |
400 |
|
13 |
22 |
13 |
55 |
2.5 |
| CH-M1260 |
M12 |
61 |
38.6 |
28.0 |
250 |
|
25 |
28 |
17 |
60 |
4 |
| CH-M1670 |
M16 |
70 |
45.2 |
22.3 |
100 |
|
30 |
37 |
22 |
70 |
5 |
|
|
Items in square brackets are the set available upon order. |
|
| Placement Procedure |
 |
1.Drive a threaded nail at the marked position using a
hammer and attach a locating fixture on the formwork.
2.After placement of reinforcing bars, place the insert
onto the locating fixture.
3.When concrete is placed, it will not penetrate into the
inside of the insert because it is plugged by the locating
fixture.
4.When the formwork is removed, fixtures and nails are
also removed because they are attached to the formwork,
and after-treatment of nails is not required.
The fixtures on the formwork can be easily removed
usinga a crowbar. |
|
 |
|
| |
|
